Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Zipp SL Sprint Stem
$246.00
You work hard for those watts—don’t lose a single one through your stem. Zipp’s SL Sprint Stem is built with the beefiest carbon layup imaginable for a strength-to-weight ratio that would humble the strongmen in the pro ranks. At 1.8 grams per newton meter of stiffness, the SL Sprint has graced the bars of countless WorldTour pros. Zipp even uses T25 Torx bolts for their unsurpassed strength, resistance to stripping, and accurate torque setting. Rest assured, it’s ready for you.
Sunlite Adjustable Top Mount Threadless Stem
$53.09
- Adjustable top mounted threadless stream - Adjustable from 0 to 60 degrees - Available in two lengths - Material: Alloy
Ritchey SuperLogic C-260 Limited Edition Carbon Stem
$279.99
Ritchey's full-carbon C-260 stem was designed to meet the needs of high-wattage European Classics specialists. High modulus carbon fiber, increased boom diameter, and a wider clamp face all increase stem stiffness for unmatched power transfer. - C-260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate width: 42mm - Steerer diameter: 1-1/8" - Limited edition yellow finish - 125g (110mm)
Ritchey WCS C-220 Stem
$89.95
You really can have it all; Ritchey's WCS C-220 stem features game-changing stiffness, and is quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Blatte Finish - 121g (110mm)
Profile Design Aris Road Stem (+/-25-degree rise)
$47.49
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Origin8 X-Tra Lift Stem Riser
$39.99 - $52.99
Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.
Kalloy Uno 820 Adjustable Stem
$29.99
Kalloy's 820 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure.
Giant Connect Stem (+/- 8-degree)
$30.00 - $32.00
• 3D forged 6061 aluminum body with oversize box cross-section • ± 8° requires fewer spacers • 46mm wide 6061 aluminum faceplate • Steel hardware
Giant Contact OD2 Stem
$50.00 - $61.00
- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Giant Contact SL 35mm Stem
$86.00
- 3D forged, 6061 aluminum alloy body with oversize box cross-section - Oversized 52mm wide 6061 alloy faceplate - 35mm handlebar clamp diameter - Not OD2, regular 1-1/8"
Giant Contact SL OD2 Stem
$90.00 - $110.00
- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversized 46mm wide 6061 alloy faceplate - Titanium hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included - Weight: 145 grams (100mm)
Giant Contact SL Stealth Stem
$180.00
- Lightweight, 3D forged, 2014 aluminum alloy - Proprietary Stealth recessed cable routing system enhances aerodynamic performance - Oversize box-section increases torsional stiffness with tuned vertical compliance
Easton EA50 Stem
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Easton EA90 Stem
$94.99 - $99.99
Upgrade your ride with the gram-shaving EA90 stem from Easton. This ultra-light bar-holder sports Easton's 3D forged aluminum to provide a great balance of low weight, high strength and stiffness for excellent steering control in all conditions. Easton's Top-Lock technology locks the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts so the EA90 is perfectly safe for carbon bars.
Dimension 31.8mm Threadless Stem
$29.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Zipp SL Speed Stem
$285.00
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
Zipp SL Sprint Stem
$285.00
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately
Zipp Service Course SL Stem
$120.00
Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Zipp Quickview integrated computer mount available separately - Lifetime warranty
Zipp Service Course SL-OS Stem
$142.00
Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Wide range of sizes and angles. - Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes - Zipp Quickview integrated computer mount available separately - Lifetime warranty
Zipp Service Course Stem
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Whisky Parts Co. No. 7 Mountain Stem
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Whisky Parts Co. No. 7 Stem
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
We The People Gooseneck Stem
$71.99
Gooseneck is Dank Kruk's signature stem from WTP. Unique sculpted look with bar alignment guides. - Shark Tooth Clamping (STC) linear knurling to prevent bar slip - Unique offset rear for improved clamping, material saving and unique look - Recessed top cap section for flush fit - Larger head bolts for more clamping power
We The People Hydra Stem
$59.99 - $69.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
We The People Logic Top Load BMX Stem
$54.99
The Logic stem is clean and simple featuring "Shark Tooth Clamping" knurling to ensure your bars never slip. - Stem Type: Top Load - Steerer Clamp Diameter: 1-1/8-inch - Bar Clamp Diameter (mm): 22.2
We The People Patrol Stem
$59.99
Based on the classic "Trail style" stems we all used to ride back in the day, the Patrol stem features a smooth, simple shape with a wider faceplate, larger head bolts, and hidden CNC cutouts under the stem to keep the weight down without making the stem look like a block of Swiss cheese. A slightly longer 53mm reach and a recessed topcap for a flush fit with the Patrol forks, make this stem the perfect crown jewel of the Patrol line. - 6061-T6 alloy, full CNC machined - Wider 47.5mm faceplate to prevent bar slip
Velo Orange Cigne Stem
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Velo Orange Happy Stem
$40.00
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes
TruVativ Atmos 7k Stem
$81.00
The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel
TruVativ Descendant 35mm Stem
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Page 1 of 8 Next page