Bike Service & Repair

(only for Road/TT bikes that are mostly in good working order)

Includes:

-Air tires

-lube chain

-light gear/brake checkover

-torque bolts

Includes:

-Full safety inspection of the bike. Any worn or broken parts are brought to your attention for repair

-Check the condition of the tires and properly inflate the tire pressure

-Check for chain stretch and wear

-Basic wipe down cleaning of frame & fork. If dirtier, an Annual Deluxe Service Package is needed

-Check for bearing play on headset, bottom bracket and hubs. Adjustment included if they are serviceable

-On-bike chain cleaning

-Complete lubrication of chain, drivetrain pivot points, and jockey pulleys

-Full adjustment of gears, including limit screws and cable tension

-Full adjustment of brakes, including pad toe, centering and spring tension

-On-bike basic wheel truing

-Check torque of all bolts and adjust

-Check handlebar straightness to wheels and adjust

-Check seat levelness and adjust

-Basic outdoor test ride when complete to confirm repairs under pedaling load

-E-Bikes ADD $80  (Includes firmware update, battery compartment cleaning, and contact inspection/clean)

-Full Suspension MTB ADD $50 (Includes removal of suspension linkage & full cleaning/inspection of bearings)

-Includes everything in the Annual Basic Service Package plus:

-Complete drivetrain clean. Cassette, chain, crank and derailleurs removed, fully soak in solvent cleaner and complete and thorough clean out of all parts.

-Will require a new chain pin/link to be installed (prices vary $8-$15 depending on drivetrain)

-E-Bikes ADD $80 (Includes firmware update, battery compartment cleaning, and contact inspection/clean)

-Full Suspension MTB ADD $50 (Includes removal of susp linkage & full cleaning/inspection of bearings)

-Includes everything in the Annual Deluxe Service Package plus:

-Complete overhaul and regrease of headset, bottom bracket, and both of the hubs. Also includes a frame polish and wax treatment

-Will require a new chain pin/link to be installed (prices vary $8-$15 depending on drivetrain)

-E-Bikes ADD $80 (Includes firmware update, battery compartment cleaning, and contact inspection/clean)

-Full Suspension MTB ADD $50 (Includes removal of suspension linkage & full cleaning/inspection of bearings)

-Electronic Shifting Firmware Update: $50:

-Annual Cable/Housing Kit (mechanical shifters): Premium $45+$20 labor or Standard $28+$20 labor

-Annual Handlebar Tape Wrapping: $20 plus your choice of bar tape

-Annual Hydraulic Brake Bleed: $83 (front/rear bleed and new fluid)