Adults

The award-winning Octal helmet remains an evolution in protection for road cyclists. With its distinctive large vents, the helmet provides optimal ventilation and comfort, while safety is heightened with extended coverage over the temples and around the back of the head. The EPS liner is strategically thicker in the most exposed areas to further enhance protection, and the fully wrapped unibody shell functions as a monocoque, enhancing structural integrity while maintaining a low weight. A lightweight size-adjustment system and ergonomic straps ensure a comfortable and secure fit, and Coolbest padding minimizes the temperature at the points where the helmet meets the head. - High-performance EPS liner, optimized in density - Fully wrapped unibody shell construction - Generously ventilated, using POC's unique ventilation design - Size-adjustment system - Straps molded into liner - Temperature-regulating Coolbest padding - Eye garage to keep your sunglasses securely in position when placed on the helmet - Certifications: EN 1078, CPSC 12.03, AS/NZS2063-2008

Aerodynamic performance, safety, and ventilation do not need to come at the expense of each other. By using our whole-helmet approach to development, we have been able to deliver unparalleled levels of aerodynamic performance, safety, and ventilation without compromise in the Ventral SPIN. Airflow zones allow the helmet to pass through the air with greater efficiency, making it faster. Residual air traveling around the helmet is managed by the 22° aero trailing edge, the perfect angle for minimizing turbulence, further improving aerodynamic performance. By leading air through rather than around the helmet, its wake is minimized, while its ventilation and cooling properties are enhanced. Other features of our whole-helmet approach include a fully wrapped unibody shell with an EPS liner for the ideal balance between weight and protection, SPIN (Shearing Pad INside), our patent-pending silicone-pad technology, a lightweight adjustment system, and an ergonomic precision strap for a flexible, comfortable, and secure fit. - Unique aerodynamic design optimized with CFD testing for enhanced aerodynamic performance and minimal air turbulence. - Helmet integrated with patent-pending SPIN (Shearing Pad INside) pads - Accelerated airflow zones, inspired by the Venturi effect, to reduce fluid drag. - Extreme cooling and ventilation due to innovative airflow design. - High-performance EPS liner with targeted and optimized density to provide the ideal balance of low weight and crash protection. - Fully wrapped unibody shell construction to increase safety and helmet integrity. - Lightweight size-adjustment system for a personalized fit. - Easily adjustable precision straps molded into the helmet liner for extra comfort and safety. - Eye garage to keep your sunglasses securely in position when placed on the helmet.

Aerodynamic performance, safety and ventilation do not need to come at the expense of each other. By using our whole-helmet approach to development, we have been able to deliver unparalleled levels of aerodynamic performance, safety and ventilation without compromise in the Ventral SPIN. Taking inspiration from the Venturi effect, the helmet’s airflow zones allow the helmet to pass through the air with greater efficiency, making it faster. Residual air traveling around the helmet is managed by the 22° aero trailing edge, the perfect angle for minimizing turbulence, further improving aerodynamic performance. By leading air through rather than around the helmet, its wake is minimized, while its ventilation and cooling properties are enhanced. Other features of our whole-helmet approach include a fully wrapped unibody shell with an EPS liner for the ideal balance between weight and protection. SPIN (Shearing Pad INside), our patent-pending silicone pad technology; a lightweight adjustment system and an ergonomic precision strap provides a flexible, comfortable and secure fit. - Unique aerodynamic design optimized with CFD testing for enhanced aerodynamic performance and minimal air turbulence. - Helmet integrated with patent pending SPIN (Shearing Pad Inside) pads - Accelerated airflow zones, inspired by the Venturi effect, to reduce fluid drag. - Extreme cooling and ventilation due to innovative air flow design. - High performance EPS liner with targeted and optimized density to provide the ideal balance of low weight and crash protection. - Fully wrapped unibody shell construction to increase safety and helmet integrity. - Light weight size adjustment system for a personalized fit. - Easily adjustable precision straps molded into the helmet liner for extra comfort and safety. - Eye garage to keep your sunglasses securely in position when placed on the helmet. - Used and preferred by Cannondale - drapac Pro Cycling Team. - Meets EN 1078, CPSC 12.03 AS/NZ 2063:2008 certifications.

MORE PROTECTION. The snazzy exterior design will leave you with compliments on more than just your riding style. Dent-resistance will give you peace of mind when you’re stashing, stowing and journeying with your helmet. You get the option to switch out the removable visor for your favorite cycling cap or snap it back in place for riding in bright sun or rain. The ultra-safe and durable in-mold shell is now designed with a deeper rear profile for additional protection at the back of the head. FEATURES - Snap-on removable visor - In-mold all-in-one construction for impact-absorbing strength, ultimate durability, and crash protection - 360° Full Surround automatically positions the helmet correctly - Easy dial-adjusted fit belt snugs the helmet to the head - 17 vents bring in cooling air to circulate over and around the head to regulate temperature - Certifications: CE/CPSC/AS

Inspired by gravity riders and presenting a modern mountain biking style, this off-road helmet is designed with generous ventilation and added protection Along with essential safety features like MIPS technology, we’ve added a lower rear coverage design to shield more of the back of your head. Direct Flow Cooling channels are designed to pull in air to keep you cool during slow, challenging climbs or flowy descents. With a one-handed dial adjustment and rear fit system you get perfect head-hugging comfort. - Simple, clean and compact helmet shape - Optimized vent design for enhanced breathability - MIPS brain protection system and lower rear coverage - New 360° full surround fit-belt - Intuitive one-handed dial adjustment (Cinch ONE fit system) - Compatible with Alumbra taillight: Liv proprietary taillight docking station - In-molded construction for added strength - TransTextura moisture-wicking, anti-odor inner padding - Pony-tail friendly rear fit system space - Detachable visor - S / M (49-57cm), M / L (53-61 cm)

The Liv Rev Comp brings the same great benefits of the Liv Rev to all levels of riders. You’ll stay cool and dry with ventilation from the Direct Flow Cooling and moisture-wicking TransTextura PLUS as you grind uphill and hit the flats. Open up on high-speed descents with a perfectly snug fit for zero distractions, thanks to the CINCH Pro head-hugging fit system. Whether you attack during a group ride or hang back to take in the views, Liv Rev Comp has you covered with a stylish design and uncompromising comfort. - AirFlow 14-vent cooling system is enhanced by three large center vents pulling air through the helmet and over the rider’s head to keep them cool - In-mold Polycarbonate (PC) shell with lightweight EPS foam provides maximum protection without being uncomfortable - Lightweight, comfortable LiteForm webbing wraps around the head for a secure and comfortable fit. It’s also hydrophobic so it won’t absorb sweat or stretch out like other webbing - Locking cam buckles keep the LiteForm webbing anchored securely - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Numen+ Link TL Magnetic mount compatible - MIPS Brain Protection System optimized design - Certifications: CPSC/CE - Western: S/M 49-57cm; M/L 53-61cm

The Liv Rev Comp brings the same great benefits of the Liv Rev to all levels of riders. You’ll stay cool and dry with ventilation from the Direct Flow Cooling and moisture-wicking TransTextura PLUS as you grind uphill and hit the flats. Open up on high-speed descents with a perfectly snug fit for zero distractions, thanks to the CINCH Pro head-hugging fit system. Whether you attack during a group ride or hang back to take in the views, Liv Rev Comp has you covered with a stylish design and uncompromising comfort. Liv Rev Comp is available with the latest MIPS technology for maximum crash protection. - AirFlow 14-vent cooling system is enhanced by three large center vents pulling air through the helmet and over the rider’s head to keep them cool - In-mold Polycarbonate (PC) shell with lightweight EPS foam provides maximum protection without being uncomfortable - Lightweight, comfortable LiteForm webbing wraps around the head for a secure and comfortable fit. It’s also hydrophobic so it won’t absorb sweat or stretch out like other webbing - Locking cam buckles keep the LiteForm webbing anchored securely - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Numen+ Link TL Magnetic mount compatible - MIPS Brain Protection System optimized design - Certifications: CPSC/CE - Small/Medium- 49-57cm; Medium/Large- 53-61cm

Thoughtfully designed so you can spend more time adventuring with your child and less time fiddling with gear, the unisize Nutz helmet incorporates kid-friendly details to provide confidence-inspiring protection for little ones graduating to balance bikes or first pedal bikes. Make gearing your child up for their ride fast and painless with a cleverly positioned cheek buckle that avoids tearful skin-pinching under the chin. Nutz features an automatic EZ Fit system that continues to adjust with your child as they grow and provides a secure fit in seconds with no pressure points or hot spots. Designed with deeper coverage around the sensitive temple area to offer more protection against accidental bumps and tumbles, as well as a built-in insect net for plenty of airflow while keeping critters out, this lightweight helmet is certified by the Consumer Products Safety Commission (CPSC) for children ages 5 and up. Enjoy peace of mind watching your little shredder learn to ride and leave the protection up to us. Better by design, KinetiCore is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built right into the helmet instead of added on after. - WEIGHT: 250g - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: EZ Fit - VENTILATION: 12 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Universal LED Features: Less Pinches, Less Tears Skip the chin-pinching drama with a child-friendly cheek buckle. Easy Fit No-fuss Automatic EZ Fit system makes finding a secure fit effortless. Just open it, put the helmet on, and it'll automatically adjust to provide the right fit for your child. No More Bugs A built-in insect net keeps bugs out while letting the breeze in, minimizing distractions and irritations. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED to the back of the helmet, so your child can be seen in all light and weather conditions. Increased Coverage Tip-overs happen. This helmet provides increased coverage around the temples, offering extra protection across the head's most sensitive area. Unisize One size fits all. The helmet shell and fit system is designed to accommodate a wide variety of head sizes and shapes. Lightweight Design Built 22% lighter than the previous Lazer Nutz MIPS helmet and with less plastics, its reduced carbon footprint design provides top-rated protection without unnecessary weight.

Whether your youngest rider is travelling in a baby seat, cargo bike, or trailer, Pnut is designed to provide premium comfort and top-rated protection with kid-specific features to maximize your time outdoors together, stress-free. Thoughtfully designed to make gearing your youngest rider up as easy and painless as possible so you can spend more time on the fun part. This unisize helmet features an automatic EZ Fit system that will keep adjusting for a secure fit as they continue to grow, and a user-friendly cheek buckle to minimize tearful chin-pinching. Deeper temple coverage adds increased protection around the head's most sensitive area, while the built-in insect netting brings cool breezes in while keeping bugs and branches out. A flatter shape at the back of the helmet lets your child sit up in their seat and soak in the views more comfortably. This lightweight helmet is certified by the Consumer Products Safety Commission (CPSC) for children ages 1 and up. Enjoy peace of mind while biking with your little one and leave the protection up to us. Better by design, KinetiCore is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built right into the helmet instead of added on after. - WEIGHT: 240g - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: EZ Fit - VENTILATION: 12 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC Features: Baby Seat Friendly Features a flatter shape at the back to make sitting and enjoying the sights in trailers or baby seats more comfortable. Less Pinches, Less Tears Skip the chin-pinching drama with a child-friendly cheek buckle. Easy Fit No-fuss Automatic EZ Fit system makes finding a secure fit effortless. Just open it, put the helmet on, and it'll automatically adjust to provide the right fit for your child. No More Bugs A built-in insect net keeps bugs out while letting the breeze in, minimizing distractions and irritations. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. Increased Coverage Tip-overs happen. This helmet provides increased coverage around the temples, offering extra protection across the head's most sensitive area. Unisize One size fits all. The helmet shell and fit system is designed to accommodate a wide variety of head sizes and shapes. Lightweight Design Built 14% lighter than the previous Lazer Pnut MIPS helmet and with less plastics, its reduced carbon footprint design provides top-rated protection without unnecessary weight.

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

- ECO Chinstrap Chin pad with eco-leather chinstrap The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin - M in moulding The innovative “in moulding” technology, joining the inner polystyrene cap to the outer polycarbonate one, ensures a better shock absorption. - MIT The MIT Technology, applied to all KASK cycling helmets, guarantees a higher safety and a complete protection thanks to the polycarbonate layer that covers the shell on the top, on the base ring and on the back. - Sanitized Inner padding fabric treated with antibacterial and antimicrobial Sanitized® process. - Up'n'Down The up‘n’down adjustment system gives the most precise and comfortable fitting of any helmet thanks to its unique double pivot design. This allows the back of the head to be cradled by the straps, which are then easily tightened to the correct tension by a central ratchet wheel. This fit system combined with a very breathable, non-slip, gel internal liner ensures top performance for the user. - Visibility High visibility stickers for maximum safety even in poor visibility conditions

Kask's Mojito helmet is refreshing, stylish, and packed full of Kask's top-shelf Italian innovations. It features in-mold construction for a durable, well ventilated lid that hugs your head and Kask's Up-N-Down double-pivot fitting system that dials down on the top of your head and neck for a supreme fit. There's even an eco-leather chin strap that's incredibly comfortable and easy to clean.

- Removable and washable inner padding in Coolmax material - ECO Chinstrap- Chin pad with eco-leather chinstrap. The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin - In moulding- The innovative “in moulding” technology, joining the inner polystyrene cap to the outer polycarbonate one, ensures a better shock absorption - MIT Technology- applied to all KASK cycling helmets, guarantees a higher safety and a complete protection thanks to the polycarbonate layer that covers the shell on the top, on the base ring and on the back. - OCTO FIT- Rubberised Micro Dial adjuster provides improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head - The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible - Sanitized- Inner padding fabric treated with antibacterial and antimicrobial Sanitized process.

Versatile Adventure. All-new design with improved fit gives cyclists of all ages and types of riding a reason to ride. Features - Designed with fit and function in mind to create a value-oriented helmet packed with features - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow exhaust ports - Low and high speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell - New Cinch ONE fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort and an easy dial function - Removable visor - Weight: 335g (size M/L) - Certifications: CPSC/CE;AS/NZS

- In-molded construction - TransTextura moisture-wicking, anti-odor inner padding - MIPS Protection - Optional visor on Path MTB helmet Sizing: - Small/Medium = 49 – 57cm - Medium/Large = 53 – 61cm

- Created for the performance rider who is seeking a professional riding experience - Designed from the beginning with ace aerodynamics applied for maximum ventilation with minimal construction - Strategically placed aerovent ports optimize airflow through the helmet, which improves aerodynamics and adds head-cooling ventilation - Element strap system (ESS) brings together Cinch Pro, Optimal Position Y, and Liteform webbing into one fit and retention system for superior fit - Low and high speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell

Conquer with confidence. Give yourself the confidence to crush it. Whether you’re making the crux move on a technical climb or bombing down the mountain on steep, rocky terrain, you need full protection to perform at your peak. The new Rail SX was developed to meet the demands of the Giant Factory Off-Road Team’s pro enduro riders. It features an integrated MIPS Brain Protection System, and a lightweight, highly ventilated design to keep you comfortable and in control when you’re pushing your limits. FEATURES - Trail-specific maximum enduro coverage EPS construction; 3mm lower (Front), 3-5mm lower(sides), 8-10mm lower (back) - MIPS Brain Protection System optimized design - AirFlow ventilation combines 18 straight vents with straight, non-tapered walls to guide airflow through deep internal channels to keep riders cool at variable speeds - Removable moto-style extended protection visor mounts cleanly to the sides and is infinitely adjustable on the move - Integrated strap clip on the rear keeps goggle straps in position and prevents them from falling off during a crash - Low-speed and high-speed impact-tuned construction with Direct Support vents, optimized low-density EPS, and ultra-thin toughened polycarbonate shells all in-mold bonded together - Element Strap System (ESS) brings together Cinch One Pro fit system, adjustable locking dividers, and LiteForm webbing into one fit and retention system for superior fit and comfort right out of the box - Cinch One Pro fit system offers 360-degree coverage and positioning with secure, adjustable height for full protection, support and comfort - Lightweight LiteForm webbing wraps around for a more secure fit - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Dual-position integrated mounting surfaces, GoPro™ curved mount compatible for cameras and the new Giant Recon light system SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 360g (size M, CPSC/CE) - Certifications: CPSC/CE;AS/NZS

Winning pedigree. Inspired by champions. Designed for everyday road riding performance, the all-new Rev Comp follows in the footsteps of the pro-level Rev, a favorite among WorldTour riders including Giro d’Italia champion Tom Dumoulin. This all-rounder introduces some new features to optimize its comfort, protection and versatility. It has 14 vents to maximize airflow, a Cinch Pro fit system for quick and comfortable fit adjustment, and is available with MIPS to offer added impact protection. Other features include integrated magnetic light mounts for riding in low-light conditions or at night. FEATURES - AirFlow 14-vent cooling system is enhanced by three large center vents that pull air through the helmet and over the rider’s head to keep them cool - In-mold Polycarbonate (PC) shell with lightweight EPS foam provides maximum protection without compromising comfort - Lightweight, comfortable LiteForm webbing wraps around the head for a secure and comfortable fit. It’s also hydrophobic so it won’t absorb sweat or stretch out - Locking cam buckles keep the LiteForm webbing anchored securely - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Numen+ Link TL magnetic mount integration SPECIFICATIONS - Western: OSFM (53-61cm), XL (55-63cm) - Certifications: CPSC/CE, AS/NZS

PRO ADVANTAGE Drawing inspiration from our acclaimed Rev MIPS and Pursuit MIPS helmets, the all-new Rev Pro MIPS helmet is the perfect combination of ultra-lightweight head-cooling design, aero speed, comfort and safety. On the grueling day-long ride or in the all-out sprint, the Rev Pro delivers you maximum performance advantage. FEATURES - We've got you covered! 1 year crash replacement program. - CFD-analysis optimized shape combines maximum ventilation with optimal aero profile - Broad vents and deep interior channels provide consistent air flow without sacrificing aerodynamics - Integrated Cinch Pro MIPS system allows more dispersed contact points around the head for all-day comfort and precise adjustment - Five-position height adjustment discreetly incorporated into lower EPS foam layer - Low- and high-speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell - Element Strap System (ESS) provides easily adjustable, ultra-thin, LiteForm single-layer straps - TransTextura Plus advanced natural fabrics fight bacteria growth by pulling sweat from a rider’s head and inhibiting the buildup of odor. SPECIFICATIONS - Western: S (51-55cm), M (55-59cm), L (59-63cm) - Asian: S (51-57cm), M (55-61cm), L (59-65cm) - Weight: TBA - Certifications: CPSC 16 CFR Part 1203, CE EN1078 2012+A1, AS/NZS 2063-2008 with Amendment 1-2009

TACKLE NEW TRAILS. With authentic off-road style and a comfortable fit, this helmet delivers it all for aspiring adventurers. FEATURES - We've got you covered! 1 year crash replacement program. - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - Airflow ventilation system with deep internal airflow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 365g (size M) - Certifications: CPSC/CE;AS/NZS)

Tackle new trails. With authentic off-road style and a comfortable fit, this new helmet delivers it all for aspiring adventurers. Features - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - AirFlow ventilation system with deep internal AirFlow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet, reducing rotational violence that causes strain to the brain at angled impacts

With its inviting style and comfort-driven technologies, Bell's Event is pure motivation to ride more miles. The TAG fit system makes finding the perfect fit easier than ever. And Overbrow Ventilation helps channel in cool air and draw out heat, so you stay cool, comfortable and focused on the ride.

With clean lines and a modern, compact shape, Bell's all-new Overdrive was designed with key trickle-down technologies from Bell’s pro-level helmets. The Overbrow Ventilation system channels cool air over the head to regulate temperature. And the new Lightweight Kit uses a special webbing material that’s lighter and less susceptible to absorbing sweat. Up your road riding game, shift into Overdrive.

Bell's Strut is a comfortable, fully featured, and stylish women's-specific helmet you'll love. Bell's ErgoDial fit system and Cam-lock straps offer an easy-to-adjust fit, and the In-Mold Microshell provides strength, low weight, and a great look. You also get a removable visor to shield your face, 15 extra-large vents to let the air in, and even a ponytail port.

The FeatherWeight features In-Mold technology to make a custom shape and fit utilizing a thin outer shell that covers and protects high-density EPS foam. - High density EPS in-mold construction - Tested and certified for CPSC and EN 1078 standards for bicycle use - Two sets of padding included for custom fitting - Crow rivets and 10 flow-vents to keep cool - Small/Medium = 50 – 56cm - Large/X-Large = 58 – 61cm

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm

- Bold dramatic features with aggressive angles while maintaining core ventilation and maximum protection - Lightweight ABS shell with large angular vents to increase cold air intake and allow for hot air to escape - Large sculpted eye port for great vision

If you’re an all mountain, trail, or enduro rider, SHRED.’s Luminary NoShock helmet caters to your needs. This in-mold helmet is especially light and offers a superior fit, exceptional comfort, and SHRED. Smart Impact Protection to provide both rotational and linear energy absorption. Its ROTATIONAL ENERGY SYSTEM™ (RES)—the lightest and thinnest solution for addressing rotational forces—is paired with the helmet’s integrated honeycomb-cone-structured SLYTECH™ Foam to create an unparalleled synergy for combating linear and multi-directional forces. And its 20 vents are strategically designed to maximize airflow. Charge with confidence and boost your performance, style, and fun with the Luminary NoShock.

- Shell is constructed with ABS - Multiple air vents for optimal ventilation and cooling - Matte finish - Durable multi-colored graphics - Ultra-plush removable, sweat absorbing and washable padded inner liner - O'Neal Fidlock magnetic buckle (engineered in Germany) for easy, single-handed fastening and release, provides maximum security while riding - Goggles rest securely in place on ridge at back of shell - Pre-installed with plastic break-away visor screws for improved safety in terms of crashing - Height adjustable visor - Airflaps compatible - Exceeds EN1078 safety standard for bicycle Helmets

Features: - Helmet with 2 outer shells and 2 EPS for increased safety and a perfect fit - Outer shell made of ABS - Maximum air flow and cooling through large ventilation openings with internal ventilation channels - Clear lacquer-sealed decors in high-quality color qualities - Comfortable, preformed and padded Dri-Lex inner lining with antibacterial Polygiene treatment, removable, sweat-absorbing and washable - Easy and quick removal of the cheek pads thanks to the emergency tabs - Secure eyeglass strap guidance thanks to the pre-formed shell design - Standard with break-away plastic umbrella screws for more safety in the event of a fall - IPX ACell's rotational impact absorption technology - GoPro mount included - Meets the safety standards EN1078 and CPSC for bicycle helmets